Get a quote

Aluminium Door Panel Layout Calculator

Enter the width and height of your opening. The calculator suggests how many panels a sliding, stacking, folding or French door needs, how wide each panel is and how much of the opening you get when it is open.

T01 · Panel layout elevationUnits: mm · NTS
Panel width
–
Panel height
–
Clear opening
–
Glass per panel
–

Approximate figures for a typical residential aluminium range: 45 mm frame each side, 40 mm interlock overlap, folding panels about 62 mm thick when stacked. Your fabricator confirms exact sizes after a site measure.

The width of each panel sets how a door looks, how heavy it is to slide and which aluminium system it needs. This calculator does the same rough split a fabricator does before a site measure, so you can compare a slider, a stacker and a bi-fold for one opening before you ask for a price.

How the calculator works

It deducts a 45 mm outer frame on each side and at the top and bottom, then divides the remaining width between the panels. Sliding and stacking panels overlap at the interlocks by about 40 mm, so each panel is a little wider than a straight split. When you choose Suggest for me, it picks the fewest panels that keep each one within the usual width for that door type.

  • Sliding doors: 2 panels (one fixed, one sliding) or 4 panels (two fixed outer panels, two sliding centre panels). The clear opening is about half the width.
  • Stacking doors: 3 to 6 panels on separate tracks that stack behind one fixed panel, so you open up everything except one panel.
  • Folding doors: 2 to 8 panels that fold and stack at the side, about 62 mm per panel, leaving almost the full width open.
  • French doors: one or two hinged leaves, ideally no wider than about 1 000 mm each.

Typical panel sizes

Door typeUsual panel widthClear openingCommon height
Sliding600 – 1 500 mmAbout 50%2 100 mm
Stacking600 – 1 200 mm67 – 83%2 100 – 2 400 mm
Folding500 – 1 000 mm85 – 95%2 100 – 2 400 mm
French600 – 1 000 mm per leafMost of the width2 100 mm

These are working ranges for standard residential systems. Heavy-duty and architectural systems carry wider and taller panels, at a higher price. A panel that is too wide is hard to slide and needs heavier rollers. A panel that is too narrow puts more frame across the view.

Choosing between a slider, stacker and bi-fold

If you want the room to open up completely to a patio, a folding door clears the most width, but the panels stack in the opening and fold out into the room or garden. A stacking door keeps more glass and a slimmer look and opens about two-thirds to five-sixths of the width. A sliding door is the most economical and needs no swing space, but only half the opening clears. For a narrow opening up to about 1 800 mm, French doors give a full-width opening with a traditional look.

Before you order

Measure the opening carefully with the measuring calculator, and check the glass weight per panel with the glass weight calculator if you are fitting rollers yourself. Then send the opening size and your preferred layout in the quote form. An installer will confirm the panel sizes after a site measure.

Frequently asked questions

How many panels does a 3.6 m stacking door need?
With a typical residential range, a 3 600 mm opening splits into 3 panels of about 1 200 mm. Four panels of about 900 mm give a lighter, easier-to-slide door and a wider clear opening, which most people prefer.
What is the widest panel for an aluminium folding door?
Most folding door systems recommend panels between 500 mm and 1 000 mm wide. Wider panels put more strain on the hinges and the top track and stick out further when folded.
Why is the clear opening smaller than my opening?
The frame takes about 45 mm on each side, and sliding or stacking panels park in the opening when the door is open. Only folding doors and French doors clear nearly the full width.
Are these exact manufacturing sizes?
No. They are planning figures. Each aluminium system has its own frame sightlines and overlaps, so your fabricator calculates the final cut sizes after measuring the opening.

More aluminium door tools

MarkDrawingToolWhat it does
T02Opening Measuring CalculatorTurn three widths, three heights and two diagonals into an order size, and check the opening is square.Open
T03Glass Weight and Roller CalculatorWeight of a glass door panel by size and glass type, and the roller rating it needs.Open
T04Safety Glass Checker (SANS 10400-N)Check whether a pane in a door, window, shower or shopfront must be safety glass.Open
T05Door and Window Schedule BuilderList every opening with size, type, colour and glass, then print it or send it as one quote request.Open
Get a free quote